Yellow Zinc Coated – Flat Head

Part Number Approval Length Diameter Head #/Case

Cases/

Skid

BNS Square Insert#2 SQ

BNS Phillips Flat Head Insert#2 PH

BNS Combo Drive InsertCombo Drive™ #2 SQ & #2 PH

HDNS134120YZSQ 1¾” (44 mm) .120” (3 mm) #2 SQ 2,000 100
HDNS200113YZSP 2” (50 mm) .113” (2.8 mm) #2PH/#2SQ 1,000 192
HDNS214113YZSP 2¼” (57 mm) .113” (2.8 mm) #2PH/#2SQ 1,000 192
HDNS212113YZSP 2½” (65 mm) .113” (2.8 mm) #2PH/#2SQ 1,000 192
HDNS300113YZPH 3” (75 mm) .113” (2.8 mm) #2 PH 1,000 100
BNS YZ Plastic StripFlat Head NailScrews® YZ coated in Plastic Strip 20° for most Framing Nailers.  Used for concrete forms, BNS reduces the damage to materials and is a Greener, Environmentally Friendly Approach, allowing materials to be reused.   Harder Woods like Oak, Ash, etc. will increase Pull-Out Resistance of Ballistic NailScrews® dramatically.  Please call or e-mail if you have questions. Concrete Form  
 

Yellow Zinc Coated – Flat Head

Part Number

Approval Length Diameter Head #/Case

Cases/

Skid

Combo Drive™ #2 SQ & #2 PH
PSNS134113YZSP

1¾” (44 mm)

.113” (2.8 mm) #2PH/#2SQ 1,000

192

PSNS200113YZSP

2” (50 mm)

.113” (2.8 mm) #2PH/#2SQ 1,000

192

PSNS214113YZSP

2¼” (57 mm)

.113” (2.8 mm) #2PH/#2SQ 1,000

192

PSNS212113YZSP

2½” (65 mm)

.113” (2.8 mm) #2PH/#2SQ 1,000

192

PSNS300113YZSP

3” (75 mm)

.113” (2.8 mm) #2PH/#2SQ 1,000

192

Use a paper tape strip nailer to install these Ballistic NailScrews®.  Used for concrete forms, BNS reduces the damage to materials and is a Greener, Environmentally Friendly Approach, allowing materials to be reused.   Harder Woods like Oak, Ash, etc. will increase Pull-Out Resistance of Ballistic NailScrews® dramatically.

Use with caps to make concrete smooth.

Yellow Zinc Coated – Flat Head

Part Number

LengthDiameterHead#/Case

Cases/

Skid

#2 PH

Combo Drive™
#2 SQ & #2 PH

HSNS114113YZPH1¼” (32 mm).113” (2.8 mm)#2 PH3,60056
HSNS114113YZSP1¼” (32 mm).113” (2.8 mm)#1 PH/#1SQ3,60056
HSNS112113YZSP1½” (38 mm).113” (2.8 mm)#1 PH/#1SQ3,60056
HSNS112YZPHBP
Blunt Point – Special Design to use when splitting is an issue.
1½” (38 mm).113” (2.8 mm)#2 PH3,60056

Leaves concrete smoother, especially when you use caps.

NSDCN65S-3

Yellow Zinc Coated – Flat Head

Part Number Approval Length Diameter Head # / Case Cases/ Skid

Combo Drive

#1 SQ & #2 PH OR #2 SQ & #2 PH

WCNS134113YZSP 1¾” (44 mm) .113” (2.8 mm) #1 SQ/#2 PH 3,600 56
WCNS200113YZSP 2” (50 mm) .113” (2.8 mm) #1 SQ/#2 PH 3,600 56
WCNS200YZ 2” (50 mm) .113” (2.8 mm) #1 SQ/#2 PH 1,000 96
WCNS214113YZSP 2¼” (57 mm) .113” (2.8 mm) #1 SQ/#2 PH 3,600 56
WCNS214YZ 2¼” (57 mm) .113” (2.8 mm) #1 SQ/#2 PH 1,000 96
WCNS212113YZSP 2½” (65 mm) .113” (2.8 mm) #1 SQ/#2 PH 3,600 56
WCNS212YZ 2½” (65 mm) .113” (2.8 mm) #1 SQ/#2 PH 1,000 96
WCNS300113YZSP 3” (75 mm) .113” (2.8 mm) #2 SQ/#2 PH 3,600 56
WCNS300YZ 3” (75 mm) .113” (2.8 mm) #2 SQ/#2 PH 1,000 96
WCNS300120YZSP 3” (75 mm) .120” (3 mm) #2 SQ/#2 PH 3,600 48
WCNS312131YZSP 3½” (90 mm) .131” (3.3 mm) #2 SQ/#2 PH 3,600 48
WCNS400YZ 4” (102 mm) .148” (3.8 mm) #2 SQ/#2 PH 800 64
Great for Southern Yellow Pine applications!  Harder Woods like Oak, Ash, etc. will increase Pull-Out Resistance of Ballistic NailScrews® dramatically.
Caps for BNS Use with caps to leave the concrete smooth. NSDCN90F